Skip to content

Products

Filters

Zinc-plated hex shoulder screw, 3/4" x 1.75" with 5/8"-11 thread, for precision alignment and industrial fastening.

SHOULDER SCREW, HEX 3/4 X 1.75 5/8-11 THRD ZN

This 3/4 × 1.75 zinc-plated hex shoulder screw with 5/8-11 threaded section is commonly specified for fixture, tooling, and guided motion applicati...

View full details
Stainless steel hex shoulder screw, 3/4" x 4.00" with 5/8"-11 thread, for precision alignment and industrial fastening.

SHOULDER SCREW, HEX 3/4 X 4.00 5/8-11 THRD SS

Low inventory. Shipping times may vary depending on order size.

This 3/4 diameter × 4.00 stainless steel hex shoulder screw with 5/8-11 threaded end is used as a precision shoulder fastener for alignment, pivot,...

View full details
Black nylon flat washer 3/4 in, 1.00 OD x .06 thick industrial hardware component

WASHER, FLAT 3/4, 1.00 OD X .06 TH NYL BLK

Used for spacing and electrical isolation, this 3/4 black nylon flat washer with 1.00-inch outer diameter and 0.06-inch thickness supports lightwei...

View full details
Stainless steel 3/4" flat washer, 1.00" OD and 0.06" thick, for corrosion-resistant industrial fastening.

WASHER, FLAT 3/4, 1.00 OD X .06 TH SS

CRITICAL INVENTORY REMAINING — Shipping may be delayed depending on order size.

Used in corrosion-resistant assemblies, this 3/4 stainless steel flat washer with 1.00-inch outer diameter and 0.06-inch thickness provides surface...

View full details
Stainless steel 3/4" flat washer, 1.13" OD and 0.03" thick, for corrosion-resistant industrial fastening.

WASHER, FLAT 3/4, 1.13 OD X .03 TH SS

This 3/4 stainless steel flat washer with 1.13-inch outer diameter and 0.03-inch thickness is suited for light-duty fastening where corrosion resis...

View full details
Stainless steel 3/4" flat washer, 1.25" OD and 0.048" thick, for corrosion-resistant industrial fastening.

WASHER, FLAT 3/4, 1.25 OD X .048 TH SS

Designed for precision spacing, this 3/4 stainless steel flat washer with 1.25-inch outer diameter and 0.048-inch thickness supports consistent loa...

View full details
Stainless steel flat washer 3/4 in, 1.31 OD x .09 thick NAS 1149 spec hardware

WASHER, FLAT 3/4, 1.31 OD X .09 TH SS NAS 1149

Built to NAS 1149 specifications, this 3/4 stainless steel flat washer with 1.31-inch outer diameter and 0.09-inch thickness is used in precision a...

View full details

WASHER, FLAT 3/4, 1.47 OD X .13 TH ZN SAE

This 3/4 SAE zinc-plated flat washer with 1.47-inch outer diameter and 0.13-inch thickness is commonly used for standard load distribution in mecha...

View full details
F436 structural flat washer 3/4 in, 1.47 OD x .15 thick, hot dip galvanized finish

WASHER, FLAT 3/4, 1.47 OD X .15 TH HDG F436

Built for structural bolting, this 3/4 hot-dip galvanized F436 flat washer with 1.47-inch outer diameter and 0.15-inch thickness supports high-stre...

View full details
SAE Grade 8 yellow zinc 3/4" flat washer, 1.47" OD and 0.15" thick, for high-strength industrial fastening.

WASHER, FLAT 3/4, 1.47 OD X .15 TH YZ SAE GR8

Designed for high-strength fastening, this 3/4 SAE Grade 8 yellow zinc flat washer with 1.47-inch outer diameter and 0.15-inch thickness supports l...

View full details
Hot dip galvanized flat washer 3/4 in, 2.25 OD x .25 thick EU spec industrial hardware

WASHER, FLAT 3/4, 2.25 OD X .25 TH HDG EU

This 3/4 flat washer with 2.25-inch outer diameter and 0.25-inch thickness in hot-dip galvanized EU pattern is used for heavy-duty load distributio...

View full details
Nord-Lock washer 3/4 in, 1.21 OD x .13 thick zinc plated wedge-lock washer

WASHER, NORD-LOCK 3/4", 1.21 OD X .13 TH ZN

Designed to resist loosening under vibration, this 3/4-inch zinc-plated Nord-Lock washer with 1.21-inch outer diameter and 0.13-inch thickness prov...

View full details
Zinc-plated spacer washer 3/4 in with 1.50 OD and .375 thick for structural connections

WASHER, SPACER 3/4, 1.50 OD X .375 TH ZN

CRITICAL INVENTORY REMAINING — Shipping may be delayed depending on order size.

This 3/4 zinc-plated spacer washer with 1.50-inch outer diameter and 0.375-inch thickness is designed to provide spacing and alignment in mechanica...

View full details
Hot dip galvanized wedge washer 3/4 inch structural fastener for heavy duty assemblies

WASHER, WEDGE 3/4 HDG

Used in high-load bolted connections, this 3/4 hot-dip galvanized wedge washer supports vibration resistance and maintains clamp load under movemen...

View full details